SBM How to solve some problems encountered by the jaw crusher

How to solve some problems encountered by the jaw crusher

The failure of the jaw crusher itself can affect its working efficiency. The jaws of the jaw crusher, the movable jaws, and the eccentric shaft are the main wear parts. In the production process, the wear condition should be observed frequently, and the wear parts should be repaired or replaced in time. Attention should be paid to the lubrication point lubrication at the lubrication point.

Affect the working efficiency of the jaw crusher and the adjustment of the discharge port size.

encountered by the jaw crusher

In the production process, the size of the discharge port needs to be adjusted according to the requirements of the size of the ore discharge. In the case of ensuring the granularity of the product, the discharge port can be enlarged to increase the production efficiency, and the size of the discharge port can be adjusted by adjusting the block. In the process of adjustment, the relationship between productivity and crushing ratio should be handled to improve the crushing capacity and reduce the production and operation indicators.

The speed of the main axis of the jaw crusher also affects the production performance of the jaw crusher.

The faster the main axis speed of the jaw crusher, the greater the power consumption per unit time. It will cause the ore that has been crushed by the crusher to be discharged, resulting in blockage.

This reduces the production capacity and increases the load on the machine, which has a greater impact on production control indicators.