How to improve the efficiency of the jaw crusher2019-04-11

Summary:How to improve the efficiency of the jaw crusherJaw crusher is mainly used in industrial sectors such as metallurgy, mining, cement, chemical, refractory materi

How to improve the efficiency of the jaw crusher

Jaw crusher is mainly used in industrial sectors such as metallurgy, mining, cement, chemical, refractory materials and ceramics. It is widely used in highway construction, water conservancy projects, building gravel, and mechanism sand processing. It is very suitable for crushing various soft, Medium hard ore. Perform coarse, medium and fine crushing operations. With the acceleration of the national infrastructure construction process, the domestic demand for crushers is huge, which promotes the development of the crusher industry in China, especially the jaw crusher.

  • 1. Material selection is the key. When selecting materials, pay attention to the hardness of the material. The harder the material is, the more difficult it is to break, and the more serious the wear on the equipment. Therefore, it is necessary to select the material suitable for the hardness of the equipment for crushing.
  • 2. The humidity of the material is the key. That is, when the moisture contained in the material is large, the material is easily adhered in the crusher, and is also easily clogged during the feeding process, resulting in a decrease in the crushing ability. Therefore, before breaking, try to find ways to reduce the water content, so that the crusher can work better.
  • 3. After the crushing, the material has high requirements on the fineness of the crushing, that is, the finer the material to be broken, the smaller the crushing ability.
  • jaw crusher
  • 4, the composition of the broken material, the smaller the fine powder contained in the material before the crushing of the small jaw crusher equipment, the more the crushing is affected, because these fine powders are easy to adhere and affect the transportation. For the content of fine powder, it should be sieved once in advance.
  • 5. The viscosity of the material. That is, the greater the viscosity of the material, the easier it is to adhere.
  • 6. The better the wear resistance of the crushing fittings (such as the hammer head and the jaw) of the jaw crusher, the greater the crushing ability. If it is not worn, it will affect the crushing capacity.

Hot Sale

Submit Your Request Here