Jaw crusher maintenance2019-04-11

Summary:Jaw crusher maintenanceThe jaw crusher consists of two jaws, which are composed of moving jaws and static jaws. The crusher is used to simulate the two movement

Jaw crusher maintenance

The jaw crusher consists of two jaws, which are composed of moving jaws and static jaws. The crusher is used to simulate the two movements of the animal and complete the crushing operation of the material. When it is used, it should be regularly maintained. Then you know how to maintain it? Introduce to everyone:

  • 1. Regularly close the jaw crusher and inspect the machine. When any stone crushing equipment is turned on and off, you should pay attention to the regular jaw crusher to check the internal wear of the machine, such as the center feeding pipe, cone cap and impeller. The degree of wear of the lower runner lining, the circumferential guard, and the wear block, and the parts with more severe wear are replaced in time to repair these parts.
  • 2, pay attention to the weight of the replacement parts and size, etc., must be replaced according to the original component parameters.
  • Jaw crusher maintenance
  • 3, smashing the transmission belt for regular inspection, smashing the conveyor belt is indispensable in the stone production line, the machine is driven by the conveyor belt, regularly adjust the tightness of the conveyor belt to ensure uniform force on the conveyor belt. When driving with two motors, the triangular tapes on both sides should be grouped and matched so that the length of each group is as uniform as possible. If the belt is too worn, please replace it in time.
  • 4, the lubrication of mechanical parts, jaw crusher using automotive grease special grade or 3 lithium base grease, add appropriate amount of grease for every 400 hours of work; work 2000 hours, open the spindle assembly to clean the bearing; general work 7200 hours to replace New bearings.

Hot Sale

Submit Your Request Here