Sand Washing Machine

【Feed grain size】: 1-150mm

【Production capacity】: 1-50t / h

【Specification】: various models (a variety of specifications)

【Material】: stone, stone powder, sand, fine sand, quartz sand, iron ore, coke, coal gangue, bauxite, ore, all need to clean the surface dust and soil materials.

Performance characteristics of wheeled sand washing machine

Wheeled sand washing machine in the sand and gravel production line is the sand and other impurities to clean, to produce better quality aggregate, but because there are many manufacturers because of the rise in steel prices to increase the cost, then In the quality of the equipment to start an article, resulting in equipment quality problems, but I plant equipment you please rest assured that there is no problem.

Here we look at my factory wheeled sand washing machine performance characteristics: First, the long life, easy maintenance; Second, no pollution, high degree of cleanliness. Production of large, 30-160 tons of sand per hour can be cleaned, wear small, wearing parts of the loss of three years is equal to zero (such as material particles 2mm), and the use of small power. Fifth, the structure is reasonable, impeller drive bearing device and water and water material isolation, greatly avoid the bearing due to flooding, sand and contaminants cause damage to the water, 6, in the small sand and stone powder loss is very little, the construction of sand grading and fineness modulus reached the national "building sand", "building with pebbles, broken Stone "standard;

The above is the performance characteristics of wheeled sand washing machine, as a professional manufacturer of mining equipment, we will develop a better product to return the majority of customers, please rest assured that the use of our equipment.

Washing sand washing machine sand washing production line

Sand washing machine is widely used in the construction site, gravel plant, and other industries to go, I plant the sand washing machine has been fully recognized by customers, but also to other businesses to promote our factory after years of effort Finally won the washing equipment market, which also thanks to our customers over the years to our support.

I produced the wheel washing sand washing machine is used with sand washing machine efficient sand washing equipment, the machine has a high degree of washing, reasonable structure, large capacity, low power consumption, fine sand loss, low failure characteristics. For the gravel, quartz sand, such as washing, grading, dehydration and optimize the design, each with its own characteristics. And can be used in conjunction with, for all kinds of users to provide accurate and flexible solutions. Efficient sand washing machine series is a round bucket washing equipment, mainly used for construction sites, gravel plants, hydropower station concrete dam site, post and telecommunications pole factory to be required sand and sand washing machine sand machine can be mixed Sand washed away trace of stone powder and impurities, thereby improving the quality of sand.

What is the function of the wheeled sand washing machine and how to carry out the maintenance of the wheel washing machine

The quality of the gravel washed by the wheeled sand washing machine is higher than that of the unqualified gravel, and in some of the gravel production lines, many wheeled sand washing machines are used to clean the sand and gravel. What is the function, and how to maintain the wheeled sand washing machine This is some of our customers are very concerned about things, here we come to the next look.

First, for the contemporary wheeled sand washing machine is the most worth mentioning is the structure and division of its bearings. Now the bearings are separated from the water and the material, so it is avoided.

Second, the loss of fine sand in the very few.

Third, in the use of wheeled sand washing machine is also inevitable in the process of some minor problems, pollution caused by premature rust caused by the damage phenomenon, it greatly improved the work efficiency and service life, while greatly reducing the cost.

Fourth, wheeled sand washing machine structure is simple, easy to operate, long life, long-term maintenance.

Applicable to each environment. It is worth noting the following points.

• 1, the case of moisture with sandpaper polished clean.
• 2, the removal of the old winding force when the sub-slot skew or open out, this time the application of needle nose pliers, wooden hammer dressing, bad reset must be green shell paper or bakelite and other hard material insulation.
• 3, the motor failure, set, the rotor core repair, they are stacked by the insulating silicon steel sheet, when the bearing wear too much, easy to damage the core lead to short circuit, then use the file and other tools to remove the burr, Insulating paint and heating and drying.
• 4, bearing in the course of the use of Gulu Gulu sound, need to check the bearing steel ring to see if the rupture, first look at the bearing rolling body, inside and outside the steel ring is damaged, rust, scars, etc., and then hand pinch bearing inner ring, And make the bearing pendulum, the other hand forced to push the outside circle, if the bearing is good, outside the steel ring should be smooth, no vibration in the rotation and the phenomenon of significant stuck, stopped after the steel ring did not reverse the phenomenon. Otherwise the bearing can no longer be used. Left hand stuck outer ring, right hand pinch inside the steel ring, forced to push in all directions, if the push is very loose, that is serious wear and tear. The rust on the outer surface of the bearing can be wiped with No. 00 sandpaper, and then placed in the gasoline cleaning; or bearing cracks, inner and outer ring fragmentation or excessive wear and tear, should replace the new bearings. When replacing a new bearing, use the same bearing as the original model

The above is for me to introduce the characteristics of the wheeled sand washing machine and wheeled sand washing machine maintenance, and each of our equipment and we should be carefully the same conservation, it will work for our work, equipment, good maintenance But also to improve the service life, which for us to save the cost, so the use of equipment at the same time also equipment maintenance!

Sand Washing Machine Technical Data